Introduction¶
This document specifies the protocol interactions and message formats for the Secure Device Onboard protocols. Secure Device Onboard is a device provisioning scheme, sometimes called device “onboarding.”
Device provisioning is the process of installing secrets and network addresses into a device so that the device and its network-based manager are able to connect using a trusted connection. For example, they may share a secret or have trusted PKI credentials.
Device provisioning causes a new entity to own the device. This requires a strong degree of trust, since the device owner must at least provision communications credentials into a Device, and probably needs complete control over the device operating system and software. For example, the device owner must patch security vulnerabilities, install or update drivers, query hardware devices, program actuators, and others. A given kind of device may restrict what an owner can do to it using Secure Device Onboard, trading off the risk of remote network compromise with the cost of perhaps needing to physically access the device to do some restricted configuration.
For the purposes of Secure Device Onboard, we assume that the device initiates a connection to the manager, and not the reverse. This is common industry practice, and has the advantages that:
-
The IP address of the manager is less likely to change than the IP address of the device.
-
The traffic outbound through network firewalls tends to be more permissive than the reverse, increasing the likelihood that the device to manager connection will not need special firewall policy.
In Secure Device Onboard, device physical installation is kept separate from device keying and remote control.
Secure Device Onboard works by establishing the ownership of a device during manufacturing, then tracking the transfers of ownership of the device until it is finally provisioned and put into service. In this way, the device provisioning problem can be thought of as a device “transfer of ownership” problem. In Secure Device Onboard, we assume that this factory-time configuration is the only configuration done to the device. Other steps taken outside the device make it possible for the device to use this configuration to find and establish trust with its owner when it is first powered on after manufacturing.
Between when the device is manufactured and when it is first powered on and given access to the Internet, the device may transfer ownership multiple times. A structured digital document, called an Ownership Voucher, is used to transfer digital ownership credentials from owner to owner without the need to power on the device.
When the device is first plugged in, the Secure Device Onboard protocols are invoked, causing the device to access the Secure Device Onboard Rendezvous Server. By protocol cooperation between the device, the Rendezvous server, and the new owner, the device and new owner are able to prove themselves to each other, sufficient to allow the new owner to establish new cryptographic control of the device. When this process is finished, the device is equipped with:
-
The Internet address and public key of its manager
-
A random number that may be used as shared secret
-
Optionally, a key pair whose public key is in a certificate signed by a trusted party of its manager
This is expected to be a strong and flexible set of credentials, enough to satisfy most IoT device to manager needs. For example, this permits a 2-way authenticated Transport Layer Security (TLS) connection from device to manager.
In the case where other credentials are needed, a TLS connection with the provisioned credentials should suffice to allow the manager to provide different ones.
In our current model, we assume the device has access to the Internet when it is first powered on. In some environments, this will require that a second Secure Device Onboard Installer Tool be used to provide a temporary, perhaps restricted, Internet connection, sufficient to allow Secure Device Onboard to proceed.
During manufacturing, an Secure Device Onboard equipped device is ideally configured with:
-
A processor containing:
-
A Trusted Execution Environment (TEE), with cryptographic hardware root of trust, based on either Intel® EPID or Elliptic Curve Digital Signature Algorithm (ECDSA)
-
An Secure Device Onboard application that runs in the processor’s TEE that maintains and operates on device credentials
-
-
A set of device ownership credentials, accessible only within the TEE:
-
Rendezvous information for determining the current owner of the device
-
Hash of a public key to form the base of a chain of signatures, referred to as the Ownership Voucher
-
Other credentials, please see section § for more information.
-
Secure Device Onboard may be deployed in other environments, perhaps with less expectation of security and tamper resistance. These include:
-
A microcontroller unit (MCU), perhaps with a hardware root of trust, where the entire system image is considered to be a single trusted object
-
An OS daemon, with keys sealed by a Trusted Platform Module (TPM) or in the filesystem
The remainder of this document presumes the ideal environment, as described previously.
Transmitted Protocol Version¶
The current protocol version of Secure Device Onboard is 1.13
Every message of the transmitted protocol for Secure Device Onboard specifies a protocol version. This version indicates the compatibility of the protocol being transmitted and received. The actual number of the protocol version is a major version and a minor version, expressed in this document with a period character ('.') between them.
The specification version may be chosen for the convenience of the public. The protocol version changes for technical reasons, and may or may not change for a given change in specification. The protocol version and specification version are different values, although a given specification must map to a given protocol version.
The receiving party of a message can use the protocol version to verify:
-
That the version is supported by the receiver
-
That the version is the same as with previous received messages in the same protocol transaction
-
Whether the receiver needs to invoke a backwards compatibility option. Since Secure Device Onboard allows the Device to choose any supported version of the protocol, this applies to the Owner or Rendezvous.
Privacy Concerns¶
Secure Device Onboard has a number of protocol features to preserve the privacy of a device’s progress from manufacturing to ownership, to resale or decommissioning.
All keys exposed by protocol entities are created only for the purposes of Secure Device Onboard, and can be used temporarily, and new ones generated frequently to keep them from being used as to profile a manufacturer, a device, or a device owner/operator.
The Intel® Enhanced Privacy ID (Intel® EPID) can be used to prove the ability to take ownership without identifying the device to the Rendezvous server or to anyone monitoring Internet traffic at the Rendezvous server. Intel® EPID may also be used to prove manufacturer and model number without identifying device.
Transfer Ownership protocol 2 (TO2), replaces all keys and identifiers in the device, except the root of trust, so that no record of previous ownership chain exists. In case of Intel® EPID, it is not necessary to replace the Intel® EPID key for based on a privacy concern.
IP addresses can be allocated dynamically by the device owner. This does not prevent a determined adversary from using IP addresses to trace devices, but can raise the bar against more casual attempts to trace devices from outside to inside an organization.
Intel® Enhanced Privacy ID (Intel® EPID) Attributes¶
As Intel has acted to enable other companies to use Intel® EPID2 for a variety of devices and applications, a new Intel® EPID2 attributes feature has been added by the Intel Key Generation Facility (iKGF), an independent key issuing authority. Intel® EPID attributes are identifiers associated with an Intel® EPID group, and reflected in the group certificate. A common set of attributes is also represented in the 128-bit EPID2 Group ID.
Group ID attributes are important because Intel® EPID does not identify a device except as the member of a group. Thus, an Intel® EPID signature is only as trustworthy as the least trustworthy member of the group, implying that—for best results—all members of the group should be equally trustworthy.
The group ID attribute allows an Intel® EPID user to work with Intel Key Generation Facility (iKGF) so that all devices in a given Intel® EPID group have the same security posture (For example, the same binary or the same source code base). The iKGF can work with the device builder to allocate multiple EPID groups from within a single “group address space” so that a given product type can be detected by a 128-bit mask-and-compare operation.
The Owner is responsible for maintaining a list of Intel® EPID attribute mask-and-compare sets for each kind of device that it is provisioning. When an Intel® EPID signature appears at the Owner (in the TO2 Protocol):
-
The Group ID is compared against the Intel® EPID Attribute mask-and-compare sets to determine that this device is supported by this Owner (if not, the signature is rejected)
-
The Group is checked for revocation (if so, the signature is rejected)
-
The signature is verified against the group public key (if it fails to verify, the signature is rejected)
We envision that Intel® EPID attribute mask-and-compare sets are included by manufacturers as part of their product documentation.
Secure Device Onboard Terminologies¶
SIGMA is a protocol that allows an Intel® EPID device to establish a trusted connection with a known entity, based on the provisioning of a Public Key Infrastructure (PKI) certificate on the trusted entity’s server. This is similar to the operation performed by the Transfer Ownership Protocol 2 (TO2).
In Secure Device Onboard, the trust of the Owner’s server is derived from the manufacturer’s credentials (its public key), through the Ownership Voucher, to the Owner key.1 Trust in Secure Device Onboard follows the supply chain entities, and not an outside single root of trust. In particular, Secure Device Onboard specifically does not require server belonging to the Owner of a device to have a certificate that is rooted in any particular authority chosen by Intel.
While this makes SIGMA itself inappropriate for Secure Device Onboard, the concepts of SIGMA are incorporated in the TO2 protocol. For example, Secure Device Onboard uses a similar key exchange and a Session Verification Key (SVK)/Session Encryption Key (SEK) mechanism to create an encrypted channel.
Refer to the Secure Device Onboard Glossary document.
Secure Device Onboard Transport Interfaces¶
Figure 1 describes the way in which Secure Device Onboard data is transported. Secure Device Onboard protocols are defined in terms of an Secure Device Onboard message layer (section §) and an encapsulation of these messages for transport to Secure Device Onboard network entities (section §).
Secure Device Onboard Devices may be either natively IP-based or non-IP-based. In the case of Secure Device Onboard Devices which are natively connected to an IP network, the Secure Device Onboard Device is capable of connecting directly to the Secure Device Onboard Owner or Secure Device Onboard Rendezvous server. In some cases, an Secure Device Onboard Installer Tool is needed to allow these devices to connect to the IP network. The Secure Device Onboard Installer Tool is a HTTP/HTTPS Proxy, with security set up to allow only Secure Device Onboard protocols to authorized Secure Device Onboard Rendezvous and Secure Device Onboard Owners.
Secure Device Onboard Devices which are not capable of IP protocols can still use Secure Device Onboard by tunneling the Secure Device Onboard Message Layer across a reliable non-IP connection. Secure Device Onboard messages implement authentication, integrity, and confidentiality mechanisms, so any reliable transport is acceptable.
The Secure Device Onboard message layer also permits Secure Device Onboard to be implemented end-to-end in a co-processor or trusted execution environment. However, security mechanisms must be provided to allow credentials provisioned by Secure Device Onboard to be copied to where they are needed. For example, if Secure Device Onboard is used to provision a symmetric secret into a co-processor, but the secret is used in the main processor, there needs to be a mechanism to preserve the confidentiality and integrity of the secret when it is transmitted between the co-processor and main-processor. This mechanism is outside the scope of this specification.
